Fingerprint padlock

P4Lite is a smart padlock that unlocks with fingerprints. It adopts semiconductor capacitive fingerprint recognition module, zinc alloy lock body, high-strength stainless steel lock beam, built-in rechargeable lithium battery, and can authorize 10 sets of fingerprint control, waterproof and dustproof design.

Features

1. Intelligent biometric fingerprint recognition technology, you can unlock by touching your finger.
2. Fingerprint unlocking, no need to bring the key, no need to worry about the key being lost or copied by others.
3. Zinc alloy lock body, light weight but strong and strong.
4. 10 sets of fingerprint unlocking can be set to facilitate family and friends.
5. Waterproof and dustproof lock body, suitable for indoor or outdoor rain and other environments.
6. Built-in rechargeable lithium battery, low power consumption design, up to 6 months or 3000 unlocks.
7. Micro USB charging port, suitable for Android mobile phone universal charging cable.
8. Low voltage alarm function, can also unlock 100 times after alarm.
9. If the battery is low, it can be unlocked in an emergency. After connecting the USB charger (or charging treasure), the fingerprint can be unlocked.
10. Support OEM/Logo customization, 13 months warranty.

Specifications:

Support 360° arbitrary direction push type fingerprint recognition
Fingerprint Recognition 72*64 Sensor Matrix
Fingerprint recognition resolution 508DPI
Can authorize fingerprint unlocking: 10 groups
ESD: +/-12kV air, +/-8kV contact
FRR: <1%
FAR: <0.002%
Fingerprint ID unlock time: <500mS
Working temperature: -20°C ~ +70°C
Working humidity: 0~95% (non-condensing)
Battery capacity: 180mAH
Fingerprint padlock size: 46*76*14mm

Instructions for use:
* The default two fingerprints (first and second) of the machine are the administrator's fingerprint, and the other 3-10 fingerprints must be authorized by the administrator before being entered.
* Any fingerprint can be unlocked when no fingerprint is entered. Once the fingerprint is set, it cannot be unlocked without authorization.
* Please keep your fingers dry when setting. It is recommended that each user set two different fingerprints, such as one finger each for the left and right hands.
* After the setup is complete, test the authorized fingerprint to unlock operation.

Low battery/charging alarm

1. When the battery is low, the fingerprint unlock will flash for 10 seconds every time, indicating that it needs to be charged.
2. It can be charged via the Android Universal Micro USB charging cable, which takes about 1 hour to fully charge.
3. The maximum standby time can be up to 6 months after a full charge, but it is still recommended to check the battery status regularly.
4. If you forget to charge, the battery will run out and the lock will remain closed to keep your property safe. At this time, charge the lock (support mobile power/fast charging treasure), you can immediately unlock by fingerprint.